Auto Ballast Anti-Heeling System
Including Workstation(computer),UPS,Printer,control cabinet,Pump,valves,Pressure Transmitter,Level Transmitter,Inclinometer,Alarm Panel and Some other additional components.
Features
Marine grade integrated computer
Programmable control, Friendly operator interface
Easy to learn and use
Steady performance pump
Steady performance valve and actuators
Operational modes
Automatic (The pump and valves Automatically controlled by system)
Manual (The pump and valves controlled by operator)
Automatic control functions
Start/stop pump automatically, start pump automatically when limited heeling degree is detected and stop pump when heeling degree become normal.
Open/close valves automatically, open related valves automatically when limited heeling degree is detected and close valves when heeling degree become normal.
Manual control functions
Start/stop pump manually, operator control on workstation by press pushbuttons.
Open/close valves manually, operator control on workstation by press pushbuttons.
Emergency Stop
Emergency stop, there is a ‘EMERGENCY STOP’ pushbutton on workstation for emergency stop, when ‘EMERGENCY STOP’ pushbutton is pressed down, the pump stopped and valves closed.
Alarms & indications functions
The heeling degree is display in workstation.
The pump and valves working status are display in workstation.
The level of tank are display.
An alarm generated When critical limited heeling degree is detected. Alarm display in alarm panel and workstation.
System failure alarms and indications
If a system failure or power supply failure to the BNWAS is detected, this should be indicated and extend by external interface.